American Firesleeve
Our aviation - aerospace firesleeve is made with an extra thick coating of high-temperature silicone rubber over a dense braided E-type fiberglass sleeve.
Our aviation firesleeve meets the fire resistance requirements
of FAA TSO - C53a and TSO - C75 and AS1055.  Also used in Marine Engine and Hydraulic systems.

For aviation/aerospace use, it may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines.  "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for 15 minutes under specific flow conditions without failure.  Fire-resistant lines must withstand a 5 minute exposure under these conditions.

Fire-proof hose lines are obtained when the proper size firesleeve is selected and properly assembled with appropriate clamps.
Firesleeve and our other silicone coated materials withstands 500°F / 260°C continuous exposure; Molten Splash at 2200°F / 1205°C for periods up to 15 minutes and short excursions to 3000°F / 1650°C.

The firesleeve on this site can be used as a firejacket or as a fire sleeve to protect all classes of hoses and cables in any usage; such as marine firesleeve, industrial firesleeve and aviation firesleeve.

Our firesleeve products at a glance...
Industrial Firesleeve
Firesleeve Tape
Aviation Firesleeve
Firesleeve with Velcro
Firesleeve FireBlanket
Firesleeve End Wrap Tape
Aerospace - Aviation (Marine) Firesleeve (meets AS1072D)

We carry a large stock of product at all times.
Most orders are
shipped same day if
ordered by 1pm EST.
100 Foot Lengths
By-The-Foot Lengths

Discount Pricing shown on
this site is for On-Line &
E-invoice orders only.
On-Line Ordering
Coming Soon
Soon We Will Accept: